Defect Classification - During Inspection (Buttons & Button Holes Defects)

During inspection many times we got some defects. All the defect are not same and not have the same importance. Out of these defect some are major and some defect is minor.

Many times we become confused to take a decision that, which is major and which minor. Today I am going to share some information with all of you regarding this issue. Also, I am going to share a list defects with major and minor classification. In this regards please note, these classifications are not fixed, it can be varied based on buyer view.

Major Defect: Anything which adversely affects the appearance, performance, including fit or customer satisfaction to a degree that would provide a discerning customer with justification for non-purchase, a return or complaint .

Minor Defect: Any variation from a standard which is not sufficient in degree to be classified as major

Today I will discuss regarding Buttons & Button Holes Defects

Defect Classification
Buttons & Button Holes Defects
Sl.	Classification	Major	Minor
1	Button is MISSING, DAMAGED or covered button has SEPARATED	X
2	Button attachment is LOOSE or INSECURE	X
3	Buttons or Button Holes are out of ALIGNMENT or IMPROPERLY
	SPACED, affecting appearance and resulting in distortion
	Adversely affecting appearance	X
	Apparent but not obvious		X
4	Button Loops are IRREGULAR or INCONSISTENT in size, shape or
	Position, affecting appearance and resulting in distortion.
	Adversely affecting appearance	X
	Apparent but not obvious		X
5	Button hole is generally UNTIDY, FRAYING, or contains
	BROKEN STITCHES
	Adversely affecting appearance	X
	Apparent but not obvious		X
6	Button hole is TOO SMALL or TOO LARGE.		X
7	Snap is too loose or too tight		X

Best regards

 

Enamul Haque Bipul
Mob: +8801717264756
Skype: bipul1984
E-mail: ehbipul@gmail.com